178 found, showing page 2 of 5
$2.79
1/8X1-1/2 GALV NIPPLE
Welded steel pipe. Hot dipped galvanized, meets ASTM A/53 standards. Schedule 40, standard pipe. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$10.49
3/4" PUSH COUPLING
Coupling. Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. It is made of 1-piece DZR brass. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F (degree Fahrenheit), 200 psi. Designed for potable water and radiant heating. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged.
View Details
$11.49
1/2X3/4 PUSH COUPLING
Reducing coupling. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.49
1/2" MIP PUSH ADAPTER
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.99
3/4" MIP PUSH ADAPTER
Male iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC (Uniform Plumbing Code), IAPMO (International Association of Plumbing and Mechanical Officials), and NSF (National Sanitation Foundation)-61 certified and approved. The fitting can be used with copper, PEX (cross-linked polyethylene), and CPVC (chlorinated polyvinyl chloride) and is rated at 200 F (degree Farhenheit), 200 psi (pounds per square inch). It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with a disconnect clip) and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$10.49
1/2" PUSH ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$12.99
3/4" PUSH ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$16.49
1/2" PUSH RPR COUPLING
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$19.99
3/4" PUSH RPR COUPLING
Repair copper pipe easily. 1 end of coupling does not have a stop, which allows you to slide coupling on to pipe and then slide back to cover where pipe is cut out. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$10.99
*1/2 SHARK DROP EAR ELBOW
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F, 200 psi. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reusable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$14.99
1/2" PUSH TEE
Brass push fitting - no soldering, clamps, unions or glue required. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable (with disconnect clip) and reuseable. Product is individually bagged.
View Details
$16.99
3/4X1/2X1/2 PUSH TEE
Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 deg. F., 200 PSI. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$9.49
1/2X3/4M SHARK ADAPTER
Push fittings are the fastest, easiest way to join copper, CTS, CPVC, and Pex in any combination. No soldering or glue. Certified to 200 P.S.I. and 200 deg. F. Low lead. 1/2" x 3/4" MPT
View Details
$9.49
*SHARK ADAPTER 1/2X3/4F
Female iron pipe end. Brass push fitting - no solder, glue, unions or tools required. UPC, IAPMO, and NSF-61 certified and approved. Fittings are removeable (with a disconnect clip) and reuseable. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 deg. F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Product is individually bagged. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$4.39
*1/2X3/8 BRASS BUSHING
Low lead red brass face bushing. 1/2" Female iron pipe x 3/8" Male iron pipe. Rough brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$5.99
*3/4X1/2 BRASS BUSHING
Low lead 3/4" Female iron pipe x 1/2" Male iron pipe. Used to convert tub spouts with 3/4" F.I.P. inlet to 1/2" F.I.P. inlet. Rough brass. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$23.49
1-1/4" 90D BRASS ELBOW
90 deg. low lead solid threaded elbow. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$16.99
*1/8" BRASS UNION
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$17.99
*1/4" BRASS UNION
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$17.99
*3/8" BRASS UNION
Low lead union. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.29
*1/8" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.39
*1/4" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.49
*3/8" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$7.59
1/2" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$11.99
*3/4" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$17.49
*1" 45D BRASS ELBOW
45 deg. low lead solid threaded elbow. Female iron pipe x Female iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.29
3/4x3/8 BRASS BUSHING
Low lead red brass standard bushing. Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$5.69
*1/4X1/8 BRASS COUPLING
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$10.29
*3/4X3/8 BRASS COUPLING
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$16.99
1x1/2 BRASS COUPLING
Low lead threaded reducing coupling. Female iron pipe X Female iron pipe. Rough brass, import. Meets following specifications: Alloy No. C84400 per ASTM B584, ANSI/ASME B16.15, ANSI B1.20.1, WW-P-460 Federal Specifications, 125 WSP, 200 WOG, California AB 1953. Vermont SB 152. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.49
*1/8" 45D STREET ELBOW
Low lead Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.89
*1/4" 45D STREET ELBOW
Low lead Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$8.39
*3/8" 45D STREET ELBOW
Low lead Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$12.99
*1/2" 45D STREET ELBOW
Low lead Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$14.49
*3/4" 45D STREET ELBOW
Low lead Female iron pipe x Male iron pipe. Rough brass. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$3.29
1/8" BRASS HEX NIPPLE
Low lead hex brass nipple. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$3.79
1/4" BRASS HEX NIPPLE
Low lead hex brass nipple. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$4.89
3/8" BRASS HEX NIPPLE
Low lead hex brass nipple. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$6.49
1/2" BRASS NEX NIPPLE
Low lead hex brass nipple. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$4.59
3/8x1/4 BRASS HEX NIPPLE
Low lead Male pipe thread x Male pipe thread with hex shoulder. Sold in bags and individually flag tagged. Manufactured to include no more than 0.25\% weighted average lead contect on wetted surfaces.
View Details
